Solar mobile power host power

How does a solar power system work?

The grid voltage is fed into the phase locked loop, which outputs the angular frequencies of the three-phase voltage signal. The BESS and solar plant output currents are then synchronized to these frequencies. The real and reactive components of the currents Id and Iq are derived using the MATLAB Park transform module.

How are solar plants modeled?

The solar plants are modeled with the existing solar PV array model found in Simulink's Simscape library. Although the actual PV system data is largely unknown, the power output of the PV installations on the circuit was able to be retrieved from the SCE distribution engineering department.

What is a mobile energy storage system (mess)?

On the other hand, mobile energy storage system (MESS) is mobilized by a big truck and connected to the distribution system at different stations in comparison with stationary energy storage system (SESS). And MESS is one of the most effective way to reduce operating cost and enhance resilience in distribution systems.

How is a SunPower PV array modeled?

For this model, the PV arrays are modeled with SunPower SPR-415E-WHT-D modules. The IV curve and Power versus Current curves for the 1.5-MW SunPower array are shown in Fig. 7. 2.3. Power converters modeling and filter design

How much power does a 3 MW PV plant produce?

In addition, each module has a maximum power rating of 414.8 W, giving the maximum output power of the plant to be N x M x 414.8 W. For the 3 MW plants, there are two solar arrays, each comprised of N = 20 series connected modules and M = 180 parallel strings. Fig. 6 shows one of the 3-MW PV plants in the system model.

What are the voltage boosting capabilities of a Bess Solar System?

For observing the voltage boosting capabilities of the BESS, the following conditions are considered: The solar power generation on the circuit is constant at 500 kW, the BESS is initially acting as a shunt inductor, outputting −1250 kVAR to the grid. The voltage regulation dead-band is set at 0.95–1.05pu and the feeder power is initially 1.2 MW.